Characteristic of the machine
1. High-precision, high-speed, and special structural material leveling machine for thin plates.
2. This machine is a powerful new equipment, used for high-speed stamping work, which can improve the quality and quantity of products.
3. It is impossible to produce good punched parts without leveling the coil material to eliminate the stress. Only by leveling the coil material to eliminate the stress can it be achieved.
4. After the machine is leveled, the material can be corrected to bend upwards or downwards or flat.
5. The transmission device is the same as the frequency converter (circulation control) can be synchronized with the punch, and the feed is balanced
6. During the two-stage leveling process, (the head end and the end end) there is no need to adjust the leveling in the middle, which can ensure the same flatness.
Specification
Model
|
SNL-100A |
SNL-200A |
SNL-300A |
SNL-400A |
Material width |
0-100mm |
0-200mm |
0-300mm |
0-400mm |
Material thickness |
0.1-0.6 |
Roller arrangement |
∅20×19pieces (upper9pieces, bottom10pieces)&∅20×25pieces (The first 6 pieces, the rear 19 pieces) |
Adjustment method |
Eight-point standalone |
Leveling speed |
0-16M/min |
Electric motor |
1/2HP |
1HP |
Feeding direction |
Left → right |
Use voltage
|
Three-phase 220V/380V |