— Products —

Home > Products> Feeder series > Automatic air feeder

Automatic air feeder

Detailed Introduction

1. Standard type
Feeding length and width: 0-450mm
Feeding thickness: 0.1-3.2mm
Types of materials that can be sent: metal, belts, plastics
Special accessories: attached above AF-5C buffer

2. R-type relaxation solenoid valve:
When high-precision feeding is required, the solenoid valve can be used to loosen the fixed splint to correct the error.

3. E-type feeding solenoid valve
It is suitable for the situation where the down stroke of the punch is too short or the feeding distance is too long.

4. Install R/E solenoid valve:
It is suitable for when the punching press has too short or too long feed distance and high precision feed is required. Solenoid valve can be used to loosen the material to correct the error.
Specification
Model AF-1C AF-2C AF-3C AF-4C AF-5C AF-6C AF-7C AF-8C AF-9C AF-10C AF-11C
Maximum feeding width (mm) 50 65 80 100 150 200 250 300 350 400 450
Maximum feeding length (mm) 50 80 80 130 150 200 250

300

350 400 450
Material thickness (mm) 0.5 0.8 1.2 1.5 2.0 2.0 2.0 2.0 2.0 2.0 2.0
Air pressure (kg/cm) 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5
Maximum feeding S.P.M 200 160 150 93 80 60 48 40 35 30 25
Friction force of fixed splint (kg) 10 27 40 55 78 78 107 107 119 119 119
Friction force of moving splint (kg) 30 49 65.5 72.5 144.5 139 200 217 220 245 245
Tension force (kg) 14 16.5 19.5 25.5 41 41 67 74 77 85 85
Air consumption (L/mm) 26.5 38.5 47 58.6 108.5 109.5 152 162.5 174.2 182.5 170.5
Weight (including tools) (kg) 8.8 9.8 12.8 19.6 52.4 52.4 80 95 156 178 200

Suzhou Handu Equipment Co., Ltd.  All rights reserved    ICP:2021037245